КОНТРОЛЛЕР СВЕЧЕЙ НАКАЛИВАНИЯ СНЯТИЕ


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE BATTERY SERVICE HOLE COVER

  4. REMOVE GLOW PLUG CONTROLLER

    B007Q14

    1. Disconnect the 4 connectors.

    2. Remove the 2 nuts and glow plug controller from the vehicle.

  5. REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET


    1. Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.

  6. REMOVE NO. 2 GLOW PLUG CONTROLLER BRACKET


    1. Remove the 2 screws and No. 2 glow plug controller bracket from the glow plug controller.