SHIFT PADDLE SWITCH REMOVAL

CAUTION / NOTICE / HINT

Note


  • Do not replace the spiral cable with the battery connected and the engine switch on.

  • Do not rotate the spiral cable when the following conditions are met: 1) The steering wheel is removed, 2) the battery is connected, and 3) the engine switch is on (IG).

  • Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.

  • Do not remove the steering sensor from the spiral cable.

PROCEDURE


  1. REMOVE STEERING WHEEL ASSEMBLY

    Click here

  2. REMOVE TRANSMISSION SHIFT SWITCH ASSEMBLY


    1. A01HHMB

      Disconnect the connector and 5 guides.

    2. A01HIW3

      Remove the 4 screws and 2 transmission shift switch assemblies with No. 1 switch wire from the steering wheel assembly.

    3. Disconnect the 2 transmission shift switch assembly connectors to remove the No. 1 switch wire from the 2 transmission shift switch assemblies.