MANUAL TRANSAXLE OIL REPLACEMENT

PROCEDURE

  1. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  2. DRAIN MANUAL TRANSAXLE OIL

    1. C274885

      Remove the manual transmission filler plug and gasket.

    2. C274886

      Remove the drain plug and gasket to drain the manual transaxle oil.

    3. Install a new gasket and the drain plug.

      39.2 N*m

      400 kgf*cm

      29 ft.*lbf

  3. ADD MANUAL TRANSAXLE OIL

    1. D025304C02

      *a

      0 to 5 mm

      Add manual transaxle oil until the oil level is between 0 and 5 mm (0.197 in.) from the bottom lip of the manual transmission filler plug opening.

      Manual Transaxle Oil

      Toyota Genuine Manual Transmission Gear Oil "LV GL-4 and SAE 75W" or "API GL-4 and SAE 75W"

      Standard Capacity

      2.3 liters (2.4 US qts, 2.0 Imp.qts.)

    2. C274885

      Install a new gasket and the manual transmission filler plug.

      39.2 N*m

      400 kgf*cm

      29 ft.*lbf

      Note:

      • When adding manual transaxle oil, make sure that the vehicle is level.

      • An excessively large or small amount of manual transaxle oil may cause problems.

      • After adding manual transaxle oil, drive the vehicle and recheck the oil level.

  4. INSPECT FOR OIL LEAK

  5. INSTALL NO. 1 ENGINE UNDER COVER

    Click here