STEERING KNUCKLE INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE

  1. INSTALL STEERING KNUCKLE

    1. C302409C01

      *a

      Magnetic Rotor (black)
      V100135

      Inside of the Vehicle

      Temporarily install a new front axle hub bearing to the steering knuckle.

      Note:

      Make sure to install the front axle hub bearing so that the magnetic rotor (black) is facing the inside of the vehicle.

    2. C302399N01

      Using SST and a press, install the front axle hub bearing to the steering knuckle.

      09608-10010

      09649-17010

      09950-70010

      09951-07100

  2. INSTALL FRONT AXLE HUB HOLE SNAP RING

    Click hereClick here

  3. INSTALL FRONT STEERING KNUCKLE HEAT INSULATOR

    Click hereClick here

  4. INSTALL FRONT AXLE HUB SUB-ASSEMBLY

    Click hereClick here

  5. INSTALL SKID CONTROL SENSOR COVER

    Click hereClick here

  6. INSTALL FRONT AXLE ASSEMBLY

    Click hereClick here