ULTRASONIC SENSOR(for Wagon Rear Side) INSTALLATION

PROCEDURE

  1. INSTALL NO. 4 ULTRASONIC SENSOR RETAINER

    1. E275094C01

      *a

      Protrusion

      *b

      Cutout

      Install the No. 4ultrasonic sensor retainer to the rear bumper assembly.

      Note:

      • Do not damage the rear bumper assembly with the protrusion when installing the No. 4ultrasonic sensor retainer.

      • Securely install the No. 4ultrasonic sensor retainer so that there are no gaps between the No. 4ultrasonic sensor retainer and surface of the rear bumper assembly.

      Tip:

      • When installing the No. 4ultrasonic sensor retainer, align the cutout and protrusion as shown in the illustration.

      • Use the same procedure for all No. 4ultrasonic sensor retainers.

  2. INSTALL ULTRASONIC SENSOR CLIP

    Tip:

    Use the same procedure for all ultrasonic sensor clips.

    1. Engage the 2 claws to install the ultrasonic sensor clip.

  3. INSTALL NO. 4 ULTRASONIC SENSOR

    Tip:

    Use the same procedure for all No. 4 ultrasonic sensors.

    1. Engage the 2 claws to install the No. 4 ultrasonic sensor.

    2. Connect the connector.

    3. except LH Side:

      1. Engage the clamp.

  4. INSTALL REAR BUMPER ASSEMBLY

    Click here