VACUUM SENSOR ASSEMBLY REMOVAL

PROCEDURE

1. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY (for LHD)

   Click here

2. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY (for RHD)

   Click here

3. REMOVE VACUUM SENSOR ASSEMBLY

   
   
   1. 

      *A	for LHD
      *B	for RHD

      Disconnect the vacuum sensor assembly connector from the vacuum sensor assembly.

   2. Remove the vacuum sensor assembly from the brake booster assembly.

4. REMOVE VACUUM SENSOR GROMMET

   
   

   1. Remove the vacuum sensor grommet from the brake booster assembly.