REAR BUMPER INSTALLATION

PROCEDURE

1. INSTALL REAR BUMPER ASSEMBLY

   
   

   1. 

      *A	w/ Wire Harness
      	Install in the Direction

      Install the rear bumper assembly.

   2. w/ Wire Harness:

      
      

      1. Connect the connector.

   3. Engage the claws as shown in the illustration.

   4. 

      Install in the Direction

      Engage the claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

   5. Install the bolt.

      Tech Tips

      Use the same procedure for the RH side and LH side.

   6. Install the rear bumper upper cover LH.

      Tech Tips

      Use the same procedure as for the LH side.

   7. Install the rear bumper assembly with the 4 clips.

2. INSTALL QUARTER OUTSIDE MOULDING LH

   
   

   1. Engage the claws to install the quarter outside moulding LH.

   2. Install the 2 screws.

3. INSTALL QUARTER OUTSIDE MOULDING RH

   Tech Tips

   Use the same procedure as for the LH side.

4. INSTALL REAR BUMPER SIDE SEAL LH

   
   

   1. Install the rear bumper side seal LH with the 6 clips.

5. INSTALL REAR BUMPER SIDE SEAL RH

   Tech Tips

   Use the same procedure as for the LH side.