PARK / NEUTRAL POSITION SWITCH ADJUSTMENT


  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01DZU9

      Remove the 2 bolts and heat insulator.

    2. A01E30OE02

      Loosen the park/neutral position switch bolt and move the shift lever to N.

    3. Align the neutral basic line with the switch groove.

    4. Hold the switch in position and tighten the bolt.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

    5. After adjustment, perform the inspection Click here.

    6. Install the heat insulator with the 2 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }