DECELERATION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL DECELERATION SENSOR

    1. Install the deceleration sensor with the 2 bolts.

      15 N*m

      153 kgf*cm

      11 ft.*lbf

      Note:

      • Do not damage the deceleration sensor.

      • Make sure that the deceleration sensor is installed securely.

    2. Connect the deceleration sensor connector.

  2. INSTALL YAW RATE SENSOR BRACKET

    1. Install the bracket with the bolt.

      15 N*m

      153 kgf*cm

      11 ft.*lbf

  3. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  4. INSTALL FRONT SEAT ASSEMBLY LH

    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick here).

  6. INSPECT DECELERATION SENSOR SIGNAL

    Click here