POWER BACK DOOR CLOSER SWITCH INSPECTION

PROCEDURE

  1. INSPECT DOOR CONTROL SWITCH ASSEMBLY

    1. Check the operation of the door control switch assembly.

      1. B338154C01

        *a

        Component without harness connected

        (Door Control Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Switch Condition

        Specified Condition

        1 (CLS) - 2 (E)

        Door control switch assembly not pushed

        10 kΩ or higher

        Door control switch assembly pushed

        Below 1 Ω

        If the result is not as specified, replace the door control switch.