ROOM TEMPERATURE SENSOR INSTALLATION

PROCEDURE

  1. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR

    1. Connect the connector and aspirator.

    2. Engage the 2 claws to install the cooler (room temp. sensor) thermistor.

  2. INSTALL NO. 1 SWITCH HOLE BASE (except Sedan)

    for LHD:

    Click here

    for RHD:

    Click here

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (except Sedan)

  4. INSTALL NO. 1 METER HOOD CLUSTER (except Sedan)

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Sedan)

  6. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (except Sedan)

  7. INSTALL NO. 1 SWITCH HOLE BASE (for Sedan)

    for LHD:

    Click here

    for RHD:

    Click here

  8. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Sedan)

  9. INSTALL NO. 1 METER HOOD CLUSTER (for Sedan)

  10. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Sedan)

  11. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for Sedan)

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for LHD with Entry and Start System)

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here