FRONT SEAT ASSEMBLY(for Power Seat) INSPECTION

PROCEDURE

1. INSPECT FRONT SEAT ADJUSTER ASSEMBLY LH (for LHD)

   
   
   1. 

      *a	Component without wire harness connected (Front Seat Adjuster Assembly LH (Slide Motor))

      Check the operation of the slide motor.

      
      

      1. Apply battery voltage to the slide motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 Forward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 Backward

         Tech Tips

         If the result is not as specified, replace the front seat adjuster assembly LH.

   2. 

      *a	Component without wire harness connected (Front Seat Adjuster Assembly LH (Front Vertical Motor))

      Check the operation of the front vertical motor.

      
      

      1. Apply battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 Upward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 Downward

         Tech Tips

         If the result is not as specified, replace the front seat adjuster assembly LH.

   3. 

      *a	Component without wire harness connected (Front Seat Adjuster Assembly LH (Rear Lifter Motor))

      Check the operation of the rear lifter motor.

      
      

      1. Apply battery voltage to the rear lifter motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Upward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Downward

         Tech Tips

         If the result is not as specified, replace the front seat adjuster assembly LH.

2. INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH (for LHD)

   
   
   1. 

      *a	Component without wire harness connected (Front Seatback Frame Sub-assembly LH (Reclining Motor))

      Check the operation of the reclining motor.

      
      

      1. Apply battery voltage to the reclining motor connector, and check that the front seatback frame sub-assembly LH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 Forward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 Backward

         Tech Tips

         If the result is not as specified, replace the front seat seatback frame sub-assembly LH.

3. INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH (for RHD)

   
   
   1. 

      *a	Component without wire harness connected (Front Seat Adjuster Assembly RH (Slide Motor))

      Check the operation of the slide motor.

      
      

      1. Apply battery voltage to the slide motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 Forward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 Backward

         Tech Tips

         If the result is not as specified, replace the front seat adjuster assembly RH.

   2. 

      *a	Component without wire harness connected (Front Seat Adjuster Assembly RH (Front Vertical Motor))

      Check the operation of the front vertical motor.

      
      

      1. Apply battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 Upward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 Downward

         Tech Tips

         If the result is not as specified, replace the front seat adjuster assembly RH.

   3. 

      *a	Component without wire harness connected (Front Seat Adjuster Assembly RH (Rear Lifter Motor))

      Check the operation of the rear lifter motor.

      
      

      1. Apply battery voltage to the rear lifter motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Upward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Downward

         Tech Tips

         If the result is not as specified, replace the front seat adjuster assembly RH.

4. INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH (for RHD)

   
   
   1. 

      *a	Component without wire harness connected (Front Seatback Frame Sub-assembly RH (Reclining Motor))

      Check the operation of the reclining motor.

      
      

      1. Apply battery voltage to the reclining motor connector, and check that the front seatback frame sub-assembly RH operates smoothly as follows.

         OK
         Condition Specified Condition Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 Forward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 Backward

         Tech Tips

         If the result is not as specified, replace the front seat seatback frame sub-assembly RH.