LANE DEPARTURE ALERT BUZZER(for LHD) INSTALLATION

PROCEDURE

1. INSTALL SKID CONTROL BUZZER ASSEMBLY (LANE DEPARTURE ALERT BUZZER)

   1. Connect the connector.

   2. Attach the clamp to install the skid control buzzer assembly (lane departure alert buzzer).

2. INSTALL STEREO OPENING COVER (w/o Audio)

   Click here

3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

   Click here

4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)

   Click here

5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

7. INSTALL TELLTALE LIGHT ASSEMBLY

   Click here

8. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

   Click here

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick here

10. CHECK SRS WARNING LIGHT

    Click here