ENGINE HOOD COURTESY SWITCH INSPECTION

PROCEDURE

  1. INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)

    1. B330449C01

      *a

      Open

      *b

      Lock

      *c

      Component without harness connected

      (Engine Hood Courtesy Switch (Hood Lock Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Open

      10 kΩ or higher

      1 - 2

      Locked

      Below 1 Ω

      If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).