REAR SEAT ASSEMBLY(for Fixed Seat Type) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:


  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

B0069JE

PROCEDURE


  1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


    1. Remove the 2 clips.

      B006B1D

    2. Detach the hooks.

    3. Remove the 10 hog rings.

      B006FRO

    4. Remove the 4 hog rings.

      B006GRI

    5. Pass the strap of the bench type rear seat cushion cover to the front side through the hole in the bench type rear seat cushion pad.

      B006ANW

    6. Remove the 26 hog rings and remove the bench type rear seat cushion cover.

      B006EX6

  2. REMOVE REAR NO. 2 SEAT WIRE RH (w/ Occupant Detection Sensor)


    1. Detach the wire harness clamps.

      B006AO8

    2. Disconnect the 3 connectors and remove the rear No. 2 seat wire RH.

  3. REMOVE SEAT COVER WIRE


    1. Remove the seat cover wire.

      B006EE6

  4. REMOVE REAR SEAT HEADREST ASSEMBLY

    Tech Tips

    Use the same procedure for the other side.


    1. Remove the rear seat headrest assembly.

  5. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY


    1. Remove the rear center seat headrest assembly.

  6. REMOVE REAR SEAT HEADREST SUPPORT


    1. B006DWIC01
      B006DHE Remove in this Direction

      Detach the claws and remove the 6 rear seat headrest supports.

  7. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY


    1. B006GBHC01
      B006DHE Remove in this Direction

      Remove the 2 nuts.

    2. Pull in the removal direction shown in the illustration to detach the hooks and remove the rear seat center armrest assembly.

  8. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH


    1. B006DLN

      Remove the 3 hog rings.

    2. B006GJD

      Detach the wire harness clamp.

    3. w/ Seat Heater System:


      1. B006AAE

        Disconnect the connector.

      2. Detach the clamp and remove the seat heater control sub-assembly LH.

      3. B006CB2

        Disconnect the connector.

      4. Detach the wire harness clamps and remove the rear seat wire LH.

    4. B006GU4C01
      B006DHE Remove in this Direction (1)
      B006B42 Remove in this Direction (2)

      Remove the nut.

    5. Remove the strap in the removal direction (1) shown in the illustration.

    6. Remove the strap in the removal direction (2) shown in the illustration.

    7. B006CD1

      Remove the 15 hog rings.

    8. B006A14

      Pass the strap of the separate type rear seatback cover through the hole of the separate type rear seatback pad to the front side.

    9. B006DBZ

      Remove the 14 hog rings and remove the separate type rear seatback cover LH.

  9. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE SEAT COVER WIRE

    Tech Tips

    Use the same procedure for the RH side.


    1. Remove the seat cover wire.

      B006D8G

  11. REMOVE REAR SEAT AIRBAG ASSEMBLY LH

    Click here

  12. REMOVE REAR SEAT AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. REMOVE SUB SEATBACK BRACKET


    1. B006AABC01
      B006DHE Remove in this Direction

      Remove the nut and remove the sub seatback bracket.

  14. REMOVE REAR CENTER SEAT ARMREST HINGE


    1. B006DBBC01
      B006DHE Remove in this Direction

      remove the screw and bush.

    2. Detach the clips.

    3. Detach the wire harness clamp and remove the rear center seat armrest hinge.

  15. REMOVE CENTER ARMREST HINGE COVER


    1. B006BP9

      Using a clip remover, detach the clips.

    2. B006CS9

      Using a clip remover, detach the clips.

    3. B006FOW

      Detach the wire harness clamp.

    4. Pull the rear console box wire through the hole in the center armrest hinge cover and remove the center arm rest hinge cover.

  16. REMOVE REAR CENTER NO. 2 SEAT ARMREST PANEL SUB-ASSEMBLY


    1. B006DCIC01
      B006DHE Remove in this Direction

      Using moulding remover A, detach the claws.

    2. Pull in the removal direction shown in the illustration to detach the claw and remove rear center No. 2 seat armrest panel sub-assembly.

  17. REMOVE REAR CENTER NO. 2 SEAT ARMREST PANEL


    1. B006GLHC01
      B006DHE Remove in this Direction

      Remove the 3 screws and pull in the removal direction shown in the illustration to detach the guides.

    2. B006CO6

      Disconnect the connector and remove the rear power seat switch together with the No. 2 rear center No. 2 seat armrest panel.

  18. REMOVE REAR POWER SEAT SWITCH

    Click here

  19. REMOVE REAR CENTER SEAT ARMREST CUP HOLDER SUB-ASSEMBLY


    1. B006FDJC01
      B006DHE Remove in this Direction

      Remove the 2 screws and pull in the removal direction shown in the illustration to remove the rear center seat armrest cup holder.

  20. REMOVE REAR CENTER SEAT ARMREST PANEL SUB-ASSEMBLY


    1. B0069XNC01
      B006DHE Remove in this Direction

      Detach the claws and remove rear center seat armrest panel sub-assembly.

  21. REMOVE REAR CENTER SEAT ARMREST DOOR SUB-ASSEMBLY


    1. B006F4O

      Remove the 2 screws with the rear center seat armrest door closed.

    2. B006D5H

      With the rear center seat armrest door opened, remove the 2 screws and then remove the rear center seat armrest door.

  22. REMOVE REAR SEAT LOCK HANDLE KNOB


    1. B006ARHC01
      B006DHE Remove in this Direction

      Using moulding remover A, create a gap between the rear seat lock handle knob and center armrest lock.

    2. Using a thin-bladed screwdriver with its tip wrapped with protective tape, detach the claws through the gap and remove the rear seat lock handle knob.

  23. REMOVE REAR SEAT ARMREST PLATE


    1. B006BGQC01
      *a Guide A
      *b Guide B
      B006DHE Remove in this Direction

      Remove the 4 screws.

    2. Press the center armrest lock sub-assembly button to detach guide A.

    3. Pull in the removal direction shown in the illustration to detach the claw and guide B, and then remove the rear seat armrest plate.

  24. REMOVE REAR CONSOLE BOX WIRE


    1. B006C0B

      Detach the hooks and remove rear center seat armrest box.

    2. B006DXG

      Remove the rear console box wire from the hooks.

    3. B006GHC

      Detach the wire harness clamps.

    4. Disconnect the connector and remove rear console box wire.

  25. REMOVE USB CHARGER SOCKET

    Click here