REAR BUMPER(for Hatchback) REMOVAL

PROCEDURE

  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    Click here

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tip:

    Use the same procedure as for the LH side.

  3. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    Click here

  4. REMOVE REAR BUMPER ASSEMBLY

    1. B410079C01
      V100155

      Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. B410080

      Remove the 2 screws.

    3. Using a clip remover, remove the 7 clips.

    4. B405527

      Using a clip remover, remove the clip.

      Tip:

      Use the same procedure for the RH side and LH side.

    5. B410082

      Disengage the 4 claws as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. B410084

      Disengage the 4 claws as shown in the illustration.

    7. B410086

      Disconnect the connector.

    8. Disengage the clamp and remove the rear bumper assembly.