FOG LIGHT ASSEMBLY(for Halogen Fog Light) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE FRONT BUMPER COVER

    for Steel Type Bumper:

    Click here

    for Resin Type Bumper:

    Click here

  2. REMOVE FOG LIGHT ASSEMBLY LH


    1. Remove the 3 screws.

      B0068V8C01
      *A for Steel Type Bumper *B for Resin Type Bumper

    2. Detach the guide and remove the fog light assembly LH.

      B006919C01
      *A for Steel Type Bumper *B for Resin Type Bumper