HOOD(for Sedan) ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT HOOD SUB-ASSEMBLY

    1. Check that the clearance measurements of areas "a" through "e" are within each standard range.

      B350297N01
      Table 1. Standard Clearance

      Area

      Measurement

      Area

      Measurement

      a

      2.35 to 6.35 mm (0.0925 to 0.250 in.)

      b

      2.35 to 6.30 mm (0.0925 to 0.248 in.)

      c

      -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)

      d

      2.7 to 5.7 mm (0.106 to 0.224 in.)

      e

      -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)

      -

      -