NAVIGATION RECEIVER REMOVAL

PROCEDURE


  1. PRECAUTION

    Click here

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE INTEGRATION CONTROL AND PANEL

    Click here

  9. REMOVE INSTRUMENT PANEL BOX ASSEMBLY

    Click here

  10. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  11. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET


    1. A0059NL

      Remove the 4 bolts.

    2. A005AID

      Disengage the 5 claws and 2 guides.

    3. Disconnect each connector and remove the navigation receiver assembly with bracket.

  12. REMOVE NO. 1 RADIO RECEIVER BRACKET


    1. A005A62

      Remove the 3 screws and No. 1 radio receiver bracket.

  13. REMOVE NO. 2 RADIO RECEIVER BRACKET


    1. A005E0J

      Remove the 3 screws and No. 2 radio receiver bracket.

  14. REMOVE NAVIGATION RECEIVER ASSEMBLY