FRONT STABILIZER BAR(for CVT) REMOVAL

PROCEDURE

1. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

   Click hereClick hereClick here

2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

   1. 

      Remove the nut and front stabilizer link assembly LH from the front shock absorber assembly.

      Note:

      Do not damage the boot of the ball joint.

      Tip:

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

   Tip:

   Perform the same procedure as the LH side.

4. REMOVE FRONT SUSPENSION MEMBER BRACE

   1. Type A:

      1. 

         Remove the 4 bolts and front suspension member front brace LH from the front suspension crossmember sub-assembly.

      2. Remove the 4 bolts and front suspension member front brace RH from the front suspension crossmember sub-assembly.

   2. Type B:

      1. 

         Remove the 8 bolts and front suspension member brace from the front suspension crossmember sub-assembly.

5. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

   Click hereClick hereClick here

6. REMOVE FRONT STABILIZER BAR

   1. Remove the front stabilizer bar with 2 front stabilizer bar bushings from the front suspension crossmember sub-assembly.

7. REMOVE FRONT STABILIZER BAR BUSHING LH

   1. 

      Remove the front stabilizer bar bushing LH from the front stabilizer bar.

8. REMOVE FRONT STABILIZER BAR BUSHING RH

   Tip:

   Perform the same procedure as the LH side.