TRANSFER CASE FRONT OIL SEAL(for LH Side) REPLACEMENT

PROCEDURE

1. REMOVE TRANSFER ASSEMBLY

   Click here

2. REMOVE TRANSFER AND TRANSAXLE SETTING STUD BOLT

   
   

   • for Transfer Side: Click here

   • for Transaxle Side (U661F): Click here

   • for Transaxle Side (K114F): Click here

3. SECURE TRANSFER ASSEMBLY

   Click here

4. REMOVE TRANSFER CASE OIL SEAL

   
   
   1. 

      *1	Transfer Case Oil Seal

      Using SST, remove the transfer case oil seal from the transfer case.

      SST

      09308-00010

      Note

      Do not scratch the press-fitting surface of the transfer case oil seal.

5. INSTALL TRANSFER CASE OIL SEAL

   
   
   1. 

      *1	Transfer Case Oil Seal

      Using SST and a hammer, tap in a new transfer case oil seal as shown in the illustration.

      SST

      09316-60011   ( 09316-00011 )

      Drive in depth (A)
      9.5 to 10.5 mm (0.375 to 0.413 in.)

      Note

      
      

      • Tap the transfer case oil seal uniformly so that the transfer case oil seal is straight.

      • Do not tap the transfer case oil seal in too far.

6. REMOVE TRANSFER ASSEMBLY

   Click here

7. INSTALL TRANSFER AND TRANSAXLE SETTING STUD BOLT

   
   

   • for Transfer Side: Click here

   • for Transaxle Side (U661F): Click here

   • for Transaxle Side (K114F): Click here

8. INSTALL TRANSFER ASSEMBLY

   Click here