DOOR CONTROL RECEIVER REMOVAL

PROCEDURE

  1. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

  3. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here

  4. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  5. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Spare Tire)

    Click here

  6. REMOVE DECK BOARD ASSEMBLY (w/ Grand Spare Tire)

    Click here

  7. REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

    Click here

  8. REMOVE REAR DECK TRIM COVER (w/ Grand Spare Tire)

    Click here

  9. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

    1. w/o Spare Tire, for Compact Spare:

      Click here

    2. w/ Grand Spare Tire:

      Click here

  10. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

  11. REMOVE SEAT BELT ANCHOR COVER CAP

    Click here

  12. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

    Click here

  13. REMOVE DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System)

    1. B337035

      Disconnect the connector.

    2. Remove the bolt and door control receiver.

  14. REMOVE DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)

    1. B343070

      Disconnect the connector.

    2. Remove the bolt and door control and tire pressure monitoring system receiver assembly.