DRIVING SUPPORT ECU INSTALLATION

PROCEDURE


  1. INSTALL DRIVING SUPPORT ECU ASSEMBLY (for LHD)


    1. A005BYR

      Engage the claw to install the driving support ECU assembly.

      Tech Tips

      If the park assist ECU was removed, install it after installing the driving support ECU assembly Click here.

  2. INSTALL DRIVING SUPPORT ECU ASSEMBLY (for RHD)


    1. A005BU8

      Engage the claw to install the driving support ECU assembly.

      Tech Tips

      If the park assist ECU was removed, install it after installing the driving support ECU assembly Click here.

  3. INSTALL ECU INTEGRATION BOX RH (for LHD)

    Click here

  4. INSTALL ECU INTEGRATION BOX RH (for RHD)

    Click here

  5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for RHD)

    Tech Tips

    Use the same procedure as for the LH side Click here.

  8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. INSTALL DECK FLOOR BOX RH

    Click here

  10. INSTALL REAR DECK FLOOR BOX

    Click here

  11. INSTALL NO. 1 DECK BOARD

    Click here

  12. INSTALL NO. 2 DECK BOARD

    Click here

  13. INSTALL DECK BOARD ASSEMBLY

    Click here