WINDOW DEFOGGER SWITCH (for Automatic Cooler System) INSTALLATION


  1. INSTALL NO. 1 COOLER WIRE


    1. A01E0FTE01
      Text in Illustration
      *1 Air Conditioning Amplifier Assembly
      *2 No. 1 Cooler Wire

      Install the No. 1 cooler wire to the air conditioning amplifier assembly as shown in the illustration.

  2. INSTALL HEATER CONTROL BASE


    1. Attach the 4 claws to install the heater control base.

  3. CONNECT NO. 1 COOLER WIRE


    1. A01E0ER

      Connect the connector as shown in the illustration.

  4. INSTALL LOWER HEATER CONTROL BASE


    1. Attach the 3 claws to the lower heater control base.

    2. Install the 4 screws.

    3. Install the 4 screws.

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. for Manual Air Conditioning System:


      1. Connect the connectors.

      2. Attach the 4 claws to connect the air conditioner control.

      3. Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.

    2. for Automatic Air Conditioning System:


      1. Connect the connectors.

      2. Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.