SIDE TURN SIGNAL LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Side Turn Signal Light Assembly LH)

      Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.

   2. Check that the side turn signal light comes on.

      OK
      The light comes on.

      If the result is not as specified, replace the side turn signal light assembly LH.

2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Side Turn Signal Light Assembly RH)

      Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.

   2. Check that the side turn signal light comes on.

      OK
      The light comes on.

      If the result is not as specified, replace the side turn signal light assembly RH.