FRONT BLOWER MOTOR INSTALLATION

PROCEDURE

1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

   
   

   1. Install the blower motor with fan sub-assembly with the 3 screws.

      Note

      
      

      • Replace the blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.

      • Do not apply excessive force to the blower motor with fan sub-assembly when installing it as it may be damaged.

   2. Connect the connector.

   3. Engage the clamp.

   4. 

      Install the front floor carpet assembly to its original position as shown in the illustration.

2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

3. INSTALL COWL SIDE TRIM BOARD RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

4. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here