STARTER(for 1.7 kW Type) INSTALLATION

PROCEDURE

1. INSTALL STARTER ASSEMBLY

   1. Install the starter assembly with the 2 bolts.

      37 N*m

      377 kgf*cm

      27 ft.*lbf

   2. Connect the starter wire with the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

   3. Connect the starter connector.

   4. Install the terminal cap.

2. INSTALL BATTERY BRACKET REINFORCEMENT

   1. Install the battery bracket reinforcement with the 2 bolts.

      20 N*m

      204 kgf*cm

      15 ft.*lbf

3. INSTALL FRONT BATTERY BRACKET

   1. Install the front battery bracket with the 4 bolts.

      20 N*m

      204 kgf*cm

      15 ft.*lbf

4. INSTALL BATTERY TRAY

5. INSTALL BATTERY

6. INSTALL BATTERY INSULATOR

7. INSTALL BATTERY CLAMP SUB-ASSEMBLY

   1. 

      *1	Bolt
      *2	Nut

      Attach the hook of the battery clamp sub-assembly to the front battery bracket.

   2. Partially tighten the nut and temporarily install the bolt.

   3. Adjust the battery clamp position.

   4. Tighten the nut and bolt.

      for bolt

      17 N*m

      173 kgf*cm

      13 ft.*lbf

      for nut

      4.9 N*m

      50 kgf*cm

      43 in.*lbf

   5. Attach the 2 wire harness clamps.

8. CONNECT CABLE TO POSITIVE BATTERY TERMINAL

   1. Connect the cable to the positive (+) battery terminal.

      5.4 N*m

      55 kgf*cm

      4 ft.*lbf

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick hereClick hereClick hereClick here