REAR BUMPER(for Wagon) REMOVAL

PROCEDURE

  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tip:

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY

    1. B350024C01
      V100155

      Protective Tape

      Put protective tape around the rear bumper assembly.

    2. B350025

      Remove the 2 screws.

    3. B350026

      Remove the 2 screws and 2 clips.

    4. B350027

      Using a clip remover, remove the 7 clips.

    5. B350030

      Using a clip remover, remove the clip.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. B350031

      Disengage the 7 claws as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

    7. B350028

      Disengage the 4 claws as shown in the illustration.

    8. w/ TOYOTA Parking Assist-sensor System:

      1. Disconnect the connector.

    9. Remove the rear bumper assembly.