IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click hereClick hereClick hereClick here

  2. REMOVE NO. 1 IGNITION COIL

    1. A354283C01

      *a

      Sensor Wire Connector

      *b

      Fuel Pump Assembly Connector

      *c

      No. 1 Ignition Coil Connector

      *d

      Camshaft Position Sensor Connector

      Disconnect the sensor wire connector.

    2. Disconnect the fuel pump assembly connector.

    3. Disconnect the No. 1 ignition coil connector.

    4. Disconnect the camshaft position sensor connector.

    5. Disengage the 2 clamps.

    6. Remove the nut and separate the engine wire from the cylinder head cover sub-assembly.

    7. A352932

      Disconnect the 3 No. 1 ignition coil connectors.

    8. A352651

      Remove the 4 bolts and 4 No. 1 ignition coils from the cylinder head cover sub-assembly.

      Note:

      If a No. 1 ignition coil has been struck or dropped, replace it.

      Tip:

      Arrange the removed parts in the correct order.

  3. REMOVE SPARK PLUG

    1. A354709

      Using a 14 mm spark plug wrench, remove the 4 spark plugs from the cylinder head sub-assembly.

      Note:

      If a spark plug has been struck or dropped, replace it.

      Tip:

      Arrange the removed parts in the correct order.