THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL NO. 2 WATER INLET HOUSING GASKET

   1. Install a new No. 2 water inlet housing gasket to the water inlet with thermostat sub-assembly.

2. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

   1. Install the water inlet with thermostat sub-assembly with the 2 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

3. CONNECT NO. 3 WATER BY-PASS HOSE (for CVT)

   1. Connect the No. 3 water by-pass hose to the water inlet with thermostat sub-assembly and slide the clip to secure it.

4. CONNECT NO. 4 WATER BY-PASS HOSE (for Manual Transaxle)

   1. Connect the No. 4 water by-pass hose to the water inlet with thermostat sub-assembly and slide the clip to secure it.

5. CONNECT NO. 2 RADIATOR HOSE

   Click hereClick here

6. INSTALL GENERATOR ASSEMBLY

   Click here

7. ADD ENGINE COOLANT

   Click here

8. INSPECT FOR COOLANT LEAK

   Click here