HEADLIGHT ASSEMBLY(for Halogen Headlight) REASSEMBLY

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL CLEARANCE LIGHT BULB (w/o Daytime Running Light)

    1. E268984

      Install the clearance light bulb to the clearance light socket.

    2. E268982

      Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow to connect them as a unit.

  2. INSTALL FRONT TURN SIGNAL LIGHT BULB

    E268980

    1. Install the front turn signal light bulb to the front turn signal light socket.

  3. INSTALL FRONT TURN SIGNAL LIGHT SOCKET

    1. E268978

      Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow to install them as a unit.

  4. INSTALL NO. 2 HEADLIGHT BULB

    1. E268976

      Turn the No. 2 headlight bulb in the direction indicated by the arrow to install it.

      Note:

      Do not touch the glass part of the bulb.

  5. INSTALL NO. 1 HEADLIGHT BULB

    1. E268974

      Turn the No. 1 headlight bulb in the direction indicated by the arrow to install it.

      Note:

      Do not touch the glass part of the bulb.

  6. INSTALL NO. 1 HEADLIGHT BACK COVER

    E268971

    1. Connect the connector.

    2. Turn the No. 1 headlight back cover in the direction indicated by the arrow to install it.