OIL PRESSURE SWITCHING VALVE INSTALLATION

PROCEDURE

  1. INSTALL OIL PRESSURE SWITCHING VALVE ASSEMBLY

    1. A263875C01

      *1

      O-Ring

      Apply a light coat of engine oil to the O-ring of the oil pressure switching valve assembly.

    2. Install the oil pressure switching valve assembly with the bolt.

      9.0 N*m

      92 kgf*cm

      80 in.*lbf

      Note:

      • When reusing the oil pressure switching valve assembly, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the oil pressure switching valve assembly.

    3. Connect the oil pressure switching valve connector and attach the wire harness clamp.

  2. ADD ENGINE OIL

    Click here

  3. INSPECT FOR OIL LEAK

    Click here

  4. INSPECT ENGINE OIL LEVEL

    Click here

  5. INSTALL NO. 1 ENGINE UNDER COVER

    Click hereClick hereClick here