ENTRY AND START SYSTEM(for Entry Function) CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE ENTRY AND START SYSTEM (for Entry Function)

   Tech Tips

   The following items can be customized.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Record the current settings before customizing.

   
   

   1. Customizing with the GTS

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Wireless Door Lock, Entry&Start or Warning.

      5. Select the setting by referring to the table below.

         Wireless Door Lock

         Display	Default	Content	Setting	Relevant ECU
         Hazard Answer Back	ON	When the doors are locked by entry function, the hazard warning lights flash once. When the doors are unlocked by entry function, the hazard warning lights flash twice.	OFF or ON	Main body ECU (multiplex network body ECU)
         Open Door Warning	ON	The buzzer sounds when the lock sensor on the door outside handle assembly is touched to perform entry lock with a door open.	OFF or ON	Main body ECU (multiplex network body ECU)
         Auto Lock Time	30 s	Function that regulates the interval between unlocking and automatic relocking of doors.	30 s, 60 s or 120 s	Main body ECU (multiplex network body ECU)
         Wireless Buzzer Resp*	ON	Function that sounds the answer-back buzzer when an entry lock or unlock operation is performed.	OFF or ON	Main body ECU (multiplex network body ECU)
         Wireless Buzzer Vol*	Level 7	Buzzer answer back volume	Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level0	Main body ECU (multiplex network body ECU)

         
         

         • *: w/ Wireless Buzzer Answer Back Function

         Entry&Start

         Display	Default	Content	Setting	Relevant ECU
         Park Wait Time (Waiting time to permit unlocking door after locking)	2.5s	Function that sets the period of time (lock confirmation time) that the door is prevented from being unlocked by operating the front door outside handle assembly after an entry lock operation is performed.	0.5s, 1.5s, 2.5s or 5s	Certification ECU (smart key ECU assembly)
         Ignition Available Area (Entry ignition available area)	All	Function that sets the area that the key must be in before the power switch can be operated.	Front or All	Certification ECU (smart key ECU assembly)
         Back Door Opening Operation*	Long	Function that opens the luggage compartment door when the driver has the electrical key transmitter sub-assembly and presses the luggage door opening switch assembly.	Long, Twice or OFF	Certification ECU (smart key ECU assembly)
         Auto Entry Cancel SW	OFF	Function that enables or disables the entry and start system.	OFF or ON	Certification ECU (smart key ECU assembly)

         
         

         • *: Except Driver's Door Only Entry and Start System

         Warning

         Display	Default	Content	Setting	Relevant ECU
         Key Low Battery Warning (Warn when key battery becomes weak)	ON	Enables or disables the sounding of the buzzer when the transmitter battery is low and the power switch is turned off after being on (IG) for 20 minutes or more.	OFF or ON	Certification ECU (smart key ECU assembly)

   2. Customizing with the multi-display (for Navigation Receiver Type)

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle customization / Door lock settings.

      3. Select the setting by referring to the table below.

         Display	Default	Content	Setting	Relevant ECU
         Entry and start system	On	Function that enables or disables the entry and start system.	On or Off	Certification ECU (smart key ECU assembly)

   3. Customizing with the multi-display (for Radio and Display Type)

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle.

      3. Select the setting by referring to the table below.

         Display	Default	Content	Setting	Relevant ECU
         Entry and Start System	On	Function that enables or disables the entry and start system.	On or Off	Certification ECU (smart key ECU assembly)

   4. Entry cancel function (manual operation)

      Tech Tips

      While the entry and start system is canceled, it is possible to lock and unlock the doors with the wireless operation or key-linked operation, and the start system can be operated by holding the electrical key transmitter sub-assembly against the power switch.

      
      

      1. The following functions are disabled when the entry and start system is canceled.

         
         

         1. Entry unlock/lock functions

         2. Push start function

         3. Key lock-in prevention function

         4. Entry warning functions

      2. When canceling the system through manual operation:

         
         

         1. Make sure the following conditions are met:

         
         

         • The power switch is off.

         • The driver door is closed.

         • The driver door is unlocked.

         2. Press the unlock button of the electrical key transmitter sub-assembly.

         3. Open the driver door within 5 seconds of completing the step above (driver door: closed at beginning of step → opened).

         4. With the driver door open, press the unlock button of the electrical key transmitter sub-assembly 2 times within 5 seconds of completing the step above.

            Note

            If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.

         5. Close and open the driver door twice completing the above step (driver door: open at beginning of step → closed → opened → closed → opened).

         6. With the driver door open, press the unlock button of the electrical key transmitter sub-assembly 2 times completing the step above.

            Note

            If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.

         7. Close and open the driver door completing the step above (driver door: open at beginning of step → closed → opened).

         8. Close the driver side door within 5 seconds of completing the above step.

         9. Check that the wireless buzzer sounds twice (short beeps) to confirm that the entry and start system has been canceled.

         Tech Tips

         Finish the step 5 to 7 within 30 seconds.

      3. Perform the following procedure to restore the entry and start system to the active state from the canceled state.

         
         

         1. Perform the procedures to cancel the entry and start system again.

         2. Check that the wireless buzzer sounds once (short beep) to confirm that the entry and start system has been restored to the active state.

            Tech Tips

            
            

            • The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.

            • The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.