CONDENSER(for ZR Series Engine) REASSEMBLY

PROCEDURE

1. INSTALL COOLER DRYER

   1. 

      Using pliers, install a new cooler dryer to the modulator.

   2. Install a new O-ring to a new cap.

   3. 

      Apply sufficient compressor oil to the O-ring and cap fitting surface.

      for HFC-134a(R134a): Compressor oil

      ND-OIL 8 or equivalent

      for HFO-1234yf(R1234yf): Compressor oil

      ND-OIL 12 or equivalent

   4. 

      Using a 14 mm hexagon wrench, install the cap to the modulator.

      2.9 N*m

      30 kgf*cm

      26 in.*lbf

      Table 1. Text in Illustration

      *1	14 mm Hexagon Wrench
      *2	Modulator

2. INSTALL NO. 1 COOLER CONDENSER CUSHION

   1. 

      Install the 4 cushions.