LIGHT CONTROL RHEOSTAT REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE NO. 1 SWITCH HOLE BASE

    A01DYS4E01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 1 switch hole base.

    2. Using a moulding remover, detach the 5 claws.

    3. Disconnect the connectors and remove the No. 1 switch hole base.

  2. REMOVE LIGHT CONTROL RHEOSTAT KNOB

    A01DW6S

    1. Detach the claw and remove the light control rheostat knob.

  3. REMOVE LIGHT CONTROL RHEOSTAT

    A01E09S

    1. Remove the nut and light control rheostat.