LUGGAGE DOOR HINGE TORSION BAR INSTALLATION

CAUTION / NOTICE / HINT

Note:

After installing the luggage door hinge torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.

PROCEDURE

  1. INSTALL LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT

    1. B350990

      Install a new luggage compartment door torsion bar support as shown in the illustration.

  2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH

    1. Check the identification mark on the luggage door hinge torsion bar LH.

      Identification Mark Color

      Blue

    2. B350988

      Connect the luggage door hinge torsion bar LH to the right side of the vehicle body as shown in the illustration.

    3. B350986N01

      Using SST, install the luggage door hinge torsion bar LH to the luggage door hinge and the left side of the vehicle body as indicated by the arrows, in the order shown in the illustration.

      09804-24010

    4. B350984

      Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support as shown in the illustration.

  3. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH

    1. Check the identification mark on the luggage door hinge torsion bar RH.

      Identification Mark Color

      Green

    2. B350982

      Connect the luggage door hinge torsion bar RH to the left side of the vehicle body as shown in the illustration.

    3. B350980N01

      Using SST, install the luggage door hinge torsion bar RH to the luggage door hinge and the right side of the vehicle body as indicated by the arrows, in the order shown in the illustration.

      09804-24010

    4. B350978

      Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support as shown in the illustration.