CONDENSER(for 1WW) REMOVAL

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFC-134a(R134a))

   Click here

2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFO-1234yf(R1234yf))

   Click here

3. REMOVE HEADLIGHT ASSEMBLY LH

   Click here

4. REMOVE HEADLIGHT ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.

5. REMOVE HOOD LOCK ASSEMBLY

   Click here

6. REMOVE NO. 3 RADIATOR AIR GUIDE

   Click here

7. REMOVE RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY

   Click here

8. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

   1. 

      Remove the bolt and disconnect the discharge hose sub-assembly from the condenser with receiver assembly.

   2. Remove the O-ring from the discharge hose sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

9. DISCONNECT AIR CONDITIONER TUBE ASSEMBLY

   1. 

      Remove the bolt and disconnect the air conditioner tube assembly from the condenser with receiver assembly.

   2. Remove the O-ring from the air conditioner tube assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

10. REMOVE UPPER RADIATOR SUPPORT

    Click here

11. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY LH

    Click here

12. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY RH

    Click here

13. REMOVE CONDENSER WITH RECEIVER ASSEMBLY

    1. 

       Disengage the 2 guides and remove the condenser with receiver assembly as shown in the illustration.

       Note:

       Do not damage the condenser with receiver assembly or radiator when removing the condenser with receiver assembly.