CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

   1. Install the crankshaft position sensor to the timing chain cover assembly with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      • If the crankshaft position sensor has been struck or dropped, replace it.

      • If reusing the crankshaft position sensor, be sure to inspect the O-ring.

      • Make sure that the O-ring is not cracked or moved out of place when installing the crankshaft position sensor.

   2. Connect the crankshaft position sensor connector.

2. INSPECT FOR ENGINE OIL LEAK

   Click here