FRONT DOOR THREE-DIMENSIONAL DISTANCE


  1. for Double Cab

    Tech Tips


    • Use point R when performing centering measurements for the body dimensions.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Roof Panel Corner -
    B, b Hood Hinge Installation Nut M8 (0.31)
    C, c Front Door Hinge Installation Nut M8 (0.31)
    D, d Front Door Hinge Installation Nut M8 (0.31)
    E, e Front Body Pillar Assembly Mark -
    F, f Front Body Pillar Assembly Mark -
    G, g Front Body Pillar Assembly Mark -
    H, h Rocker Panel Assembly Mark -
    J, j Rocker Panel Assembly Mark -
    K, k Roof Side Rail Assembly Mark -
    L, l Center Body Pillar Assembly Mark -
    M, m Center Body Pillar Assembly Mark -
    N, n Front Door Lock Striker Installation Nut M8 (0.31)
    O, o Rear Door Hinge Installation Nut M8 (0.31)
    P, p Rear Door Hinge Installation Nut M8 (0.31)
    Q, q Rocker Panel Assembly Mark -
    R Front Floor Panel Reinforcement Standard Hole φ10 (0.39)
    A01KY66C01
    *a Distance between points other than those above *b

    mm

    (in.)
    A01KXRNC01
    *a

    mm

    (in.)

    		 - -

  2. for Single Cab

    Tech Tips


    • Use point O when performing centering measurements for the body dimensions.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Roof Panel Corner -
    B, b Hood Hinge Installation Nut M8 (0.31)
    C, c Front Door Hinge Installation Nut M8 (0.31)
    D, d Front Door Hinge Installation Nut M8 (0.31)
    E, e Front Body Pillar Assembly Mark -
    F, f Front Body Pillar Assembly Mark -
    G, g Front Body Pillar Assembly Mark -
    H, h Rocker Panel Assembly Mark -
    J, j Rocker Panel Assembly Mark -
    K, k Roof Side Rail Assembly Mark -
    L, l Quarter Panel Assembly Mark -
    M, m Quarter Panel Assembly Mark -
    N, n Front Door Lock Striker Installation Nut M8 (0.31)
    O Front Floor Panel Reinforcement Standard Hole φ10 (0.39)
    A01KXZZC01
    *a Distance between points other than those above *b

    mm

    (in.)
    A01KXSYC01
    *a

    mm

    (in.)

    		 - -

  3. for Smart Cab

    Tech Tips


    • Use point R when performing centering measurements for the body dimensions.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Roof Panel Corner -
    B, b Hood Hinge Installation Nut M8 (0.31)
    C, c Front Door Hinge Installation Nut M8 (0.31)
    D, d Front Door Hinge Installation Nut M8 (0.31)
    E, e Front Body Pillar Assembly Mark -
    F, f Front Body Pillar Assembly Mark -
    G, g Front Body Pillar Assembly Mark -
    H, h Rocker Panel Assembly Mark -
    J, j Rocker Panel Assembly Mark -
    K, k Rocker Panel Assembly Mark -
    L, l Roof Side Rail Assembly Mark -
    M, m Roof Side Rail Assembly Mark -
    N, n Quarter Panel Assembly Mark -
    O, o Quarter Panel Assembly Mark -
    P, p Rear Door Hinge Installation Nut M8 (0.31)
    Q, q Rear Door Hinge Installation Nut M8 (0.31)
    R Front Floor Panel Reinforcement Standard Hole φ10 (0.39)
    A01KY4SC01
    *a Distance between points other than those above *b

    mm

    (in.)
    A01KXS4C01
    *a

    mm

    (in.)

    		 - -