STEERING WHEEL INSTALLATION

PROCEDURE


  1. INSTALL LOWER STEERING WHEEL BOSS COVER


    1. A005EFR

      Engage the 2 pins and 4 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.

  2. INSTALL CRUISE CONTROL SWITCH WIRE

  3. INSTALL CRUISE CONTROL MAIN SWITCH

    Click here

  4. INSTALL STEERING PAD SWITCH ASSEMBLY

    Click here

  5. INSTALL STEERING SHAKE DAMPER


    1. A0059YS

      Install the steering shake damper to the steering wheel sub-assembly with the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

  6. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  7. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  8. INSTALL STEERING WHEEL ASSEMBLY


    1. A0059MLE01
      Text in Illustration
      *a Matchmark

      Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.

    2. Install the steering wheel assembly set nut.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

    3. Connect the connectors to the spiral cable sub-assembly.

  9. CHECK STEERING WHEEL CENTER POINT

  10. INSTALL HORN BUTTON ASSEMBLY

    Click here