REAR NO. 1 SEAT OUTER BELT ASSEMBLY REMOVAL

PROCEDURE

1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

2. REMOVE REAR NO. 2 SEAT ASSEMBLY LH

   1. Remove the rear No. 2 seat assembly LH (Click here).

3. REMOVE REAR NO. 1 FLOOR STEP COVER

   Click here

4. REMOVE QUARTER SCUFF PLATE LH

   Click here

5. REMOVE REAR DOOR SCUFF PLATE LH

   Click here

6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

   1. Partially remove the rear door opening trim weatherstrip so that the front quarter trim panel assembly LH and deck trim side panel assembly LH can be removed (Click here).

7. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

   Click here

8. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

9. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

   Click here

10. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Click here

11. REMOVE ASSIST GRIP PLUG

    Click here

12. REMOVE ASSIST GRIP SUB-ASSEMBLY

    Click here

13. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    1. 

       Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

    2. 

       Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    3. 

       for RH Side:

       Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    4. Remove the 2 bolts and 2 screws.

    5. Detach the 3 clips and 8 claws.

    6. Disconnect each connector and remove the deck trim side panel.

       

14. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Click here

15. REMOVE REAR SIDE NO. 2 AIR DUCT (for RH Side, w/ Rear Air Conditioning System)

    Click here

16. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    1. 

       Remove the nut and rear No. 1 seat outer belt shoulder anchor.

    2. 

       Disconnect the pretensioner connector as shown in the illustration.

    3. 

       Remove the 2 bolts and rear No. 1 seat outer belt assembly.

17. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

    Click here