FRAME(for 2WD) THREE-DIMENSIONAL DISTANCE


  1. for Double Cab


    1. Upper Face

      Tech Tips


      • In cases in which only one dimension is given, left and right are symmetrical.

      • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

      Measuring Point Name
      Symbol Name

      Hole Diameter

      mm (in.)
      A, a Body Mounting Hole φ26 (1.02)
      B, b Shock Absorber Installation Hole φ12.2 (0.48)
      C, c Body Mounting Hole φ31 (1.22)
      D, d Side Rail Inner Channel Standard Hole

      16X16

      (0.63X0.63)
      E, e Body Mounting Hole φ75 (2.95)
      F, f Rear Body Mounting Nut M12 (0.47)
      G, g Rear Body Mounting Hole φ24 (0.94)
      H, h Rear Body Mounting Hole φ24 (0.94)
      A01KY0WC01
      *A FRONT *B LH
      *C RH - -
      *a

      mm

      (in.)

      		 - -

    2. Lower Face

      Tech Tips


      • In cases in which only one dimension is given, left and right are symmetrical.

      • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

      Measuring Point Name
      Symbol Name

      Hole Diameter

      mm (in.)
      A, a Bumper Reinforcement Installation Nut M10 (0.39)
      B, b Stabilizer Bracket Installation Nut M10 (0.39)
      C, c Suspension Lower Arm Installation Hole

      16.5X34.5

      (0.65X1.36)
      D, d Suspension Lower Arm Installation Hole

      16.5X34.5

      (0.65X1.36)
      E, e Side Rail Inner Channel Standard Hole

      16X16

      (0.63X0.63)
      F, f Rear Spring Front Hanger Hole φ14.6 (0.57)
      G, g Bound Stopper Installation Nut M8 (0.31)
      H, h Rear Spring Rear Hanger Hole φ30.35 (1.19)
      J, j Side Rail Outer Channel Standard Hole φ13 (0.51)
      A01KXU0C01
      *A FRONT *B LH
      *C RH - -
      *a Distance between points other than those to the left *b

      mm

      (in.)

  2. for Single Cab


    1. Upper Face


      1. for Short Body

        Tech Tips


        • In cases in which only one dimension is given, left and right are symmetrical.

        • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

        Measuring Point Name
        Symbol Name

        Hole Diameter

        mm (in.)
        A, a Body Mounting Hole φ26 (1.02)
        B, b Shock Absorber Installation Hole φ12.2 (0.48)
        C, c Body Mounting Hole φ31 (1.22)
        D, d Side Rail Inner Channel Standard Hole

        16X16

        (0.63X0.63)
        E, e Body Mounting Hole φ27 (1.06)
        F, f Rear Body Mounting Hole φ23 (0.91)
        G Rear Body Mounting Hole

        23X15

        (0.91X0.59)
        g Rear Body Mounting Hole φ15 (0.59)
        H, h Rear Body Mounting Hole φ24 (0.94)
        J, j Rear Body Mounting Hole φ24 (0.94)
        A01KY2WC01
        *A FRONT *B LH
        *C RH - -
        *a

        mm

        (in.)

        		 - -

      2. for Long Body

        Tech Tips


        • In cases in which only one dimension is given, left and right are symmetrical.

        • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

        Measuring Point Name
        Symbol Name

        Hole Diameter

        mm (in.)
        A, a Body Mounting Hole φ26 (1.02)
        B, b Shock Absorber Installation Hole φ12.2 (0.48)
        C, c Body Mounting Hole φ31 (1.22)
        D, d Side Rail Inner Channel Standard Hole

        16X16

        (0.63X0.63)
        E, e Body Mounting Hole φ27 (1.06)
        F, f Rear Body Mounting Hole φ23 (0.91)
        G Rear Body Mounting Hole

        23X15

        (0.91X0.59)
        g Rear Body Mounting Hole φ15 (0.59)
        H, h Rear Body Mounting Hole φ24 (0.94)
        J, j Rear Body Mounting Hole φ24 (0.94)
        A01KY2YC01
        *A FRONT *B LH
        *C RH - -
        *a

        mm

        (in.)

        		 - -

    2. Lower Face


      1. for Short Body

        Tech Tips


        • In cases in which only one dimension is given, left and right are symmetrical.

        • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

        Measuring Point Name
        Symbol Name

        Hole Diameter

        mm (in.)
        A, a Bumper Reinforcement Installation Nut M10 (0.39)
        B, b Stabilizer Bracket Installation Nut M10 (0.39)
        C, c Suspension Lower Arm Installation Hole

        16.5X34.5

        (0.65X1.36)
        D, d Suspension Lower Arm Installation Hole

        16.5X34.5

        (0.65X1.36)
        E, e Side Rail Inner Channel Standard Hole

        16X16

        (0.63X0.63)
        F, f Rear Spring Front Hanger Hole φ14.6 (0.57)
        G, g Bound Stopper Installation Nut M8 (0.31)
        H, h Rear Spring Rear Hanger Hole φ30.35 (1.19)
        J, j Side Rail Outer Channel Standard Hole φ13 (0.51)
        A01KY18C01
        *A FRONT *B LH
        *C RH - -
        *a Distance between points other than those to the left *b

        mm

        (in.)

      2. for Long Body

        Tech Tips


        • In cases in which only one dimension is given, left and right are symmetrical.

        • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

        Measuring Point Name
        Symbol Name

        Hole Diameter

        mm (in.)
        A, a Bumper Reinforcement Installation Nut M10 (0.39)
        B, b Stabilizer Bracket Installation Nut M10 (0.39)
        C, c Suspension Lower Arm Installation Hole

        16.5X34.5

        (0.65X1.36)
        D, d Suspension Lower Arm Installation Hole

        16.5X34.5

        (0.65X1.36)
        E, e Side Rail Inner Channel Standard Hole

        16X16

        (0.63X0.63)
        F, f Rear Spring Front Hanger Hole φ14.6 (0.57)
        G, g Bound Stopper Installation Nut M8 (0.31)
        H, h Rear Spring Rear Hanger Hole φ30.35 (1.19)
        J, j Side Rail Outer Channel Standard Hole φ13 (0.51)
        A01KXP0C01
        *A FRONT *B LH
        *C RH - -
        *a Distance between points other than those to the left *b

        mm

        (in.)

  3. for Smart Cab


    1. Upper Face

      Tech Tips


      • In cases in which only one dimension is given, left and right are symmetrical.

      • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

      Measuring Point Name
      Symbol Name

      Hole Diameter

      mm (in.)
      A, a Body Mounting Hole φ26 (1.02)
      B, b Shock Absorber Installation Hole φ12.2 (0.48)
      C, c Body Mounting Hole φ31 (1.22)
      D, d Side Rail Inner Channel Standard Hole

      16X16

      (0.63X0.63)
      E, e Body Mounting Hole φ75 (2.95)
      F Rear Body Mounting Hole

      23X15

      (0.91X0.59)
      f Rear Body Mounting Hole φ15 (0.59)
      G, g Rear Body Mounting Hole φ24 (0.94)
      H, h Rear Body Mounting Hole φ24 (0.94)
      A01KXTCC01
      *A FRONT *B LH
      *C RH - -
      *a

      mm

      (in.)

      		 - -

    2. Lower Face

      Tech Tips


      • In cases in which only one dimension is given, left and right are symmetrical.

      • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

      Measuring Point Name
      Symbol Name

      Hole Diameter

      mm (in.)
      A, a Bumper Reinforcement Installation Nut M10 (0.39)
      B, b Stabilizer Bracket Installation Nut M10 (0.39)
      C, c Suspension Lower Arm Installation Hole

      16.5X34.5

      (0.65X1.36)
      D, d Suspension Lower Arm Installation Hole

      16.5X34.5

      (0.65X1.36)
      E, e Side Rail Inner Channel Standard Hole

      16X16

      (0.63X0.63)
      F, f Rear Spring Front Hanger Hole φ14.6 (0.57)
      G, g Bound Stopper Installation Nut M8 (0.31)
      H, h Rear Spring Rear Hanger Hole φ30.35 (1.19)
      J, j Side Rail Outer Channel Standard Hole φ13 (0.51)
      A01KXRWC01
      *A FRONT *B LH
      *C RH - -
      *a Distance between points other than those to the left *b

      mm

      (in.)