REAR BUMPER INSTALLATION

PROCEDURE


  1. INSTALL REAR BUMPER ASSEMBLY


    1. Connect the connector.

    2. B006GNOC01
      B006DHE Install in this Direction

      Attach the claw to install the rear bumper assembly as shown in the illustration.

    3. B006EYKC01
      B006DHE Install in this Direction

      Attach the claw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. B006EVA

      Install the 2 screws.

    5. B006FR3

      Install the 8 clips.

    6. B0069Q8

      Install the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. B006CWU

      Install the 3 clips.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL REAR COMBINATION LIGHT COVER LH


    1. B0069NUC01
      B006DHE Install in this Direction

      Attach the claw and install the rear combination light cover LH.

    2. B006A2PC01
      B006DHE Install in this Direction

      Attach the claw as shown in the illustration.

  3. INSTALL REAR COMBINATION LIGHT COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Hands Free Power Trunk Lid)

    for 8GR-FKS:

    Click here

    for V35A-FTS:

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Hands Free Power Trunk Lid)

    Click here

  6. INITIALIZE POWER TRUNK LID CONTROL SYSTEM

    Tech Tips

    When the luggage compartment door is opened using a mechanical key.

    Click here

  7. PERFORM CALIBRATION


    1. w/ Parking Support Brake System:

      Click here