ЗАДАЮЩАЯ ШЕСТЕРНЯ УСТАНОВКА


  1. INSTALL COUNTER GEAR FRONT BEARING

    A01E0MCE01

    1. Using SST and a press, press in a new front bearing to the counter gear.

      SST
      09515-10010
    2. A01DY7WE01

      Select a snap ring that will allow minimum axial play.

      Standard clearance
      0.1 mm (0.0039 in.) or less
      Standard No. 2 counter gear front bearing snap ring thickness
      Mark Thickness
      1 2.05 to 2.10 mm (0.0807 to 0.0827 in.)
      2 2.10 to 2.15 mm (0.0827 to 0.0847 in.)
      3 2.15 to 2.20 mm (0.0847 to 0.0866 in.)
      4 2.20 to 2.25 mm (0.0866 to 0.0886 in.)
      5 2.25 to 2.30 mm (0.0886 to 0.0906 in.)
      6 2.30 to 2.35 mm (0.0906 to 0.0925 in.)
    3. A01DXH5E01

      Using a snap ring expander, install the snap ring.

  2. INSTALL NO. 3 TRANSMISSION HUB SLEEVE

    A01DZNJE01

    1. Coat the 5th gear with gear oil.

    2. Install the No. 3 hub sleeve and 2 No. 3 synchromesh shifting keys to the 5th gear.

      Tech Tips

      Be sure to set the No. 3 hub sleeve and No. 3 synchromesh shifting keys to the 5th gear in the correct direction.

    3. Install the key spring (C spring) and key spring (return spring) to the 5th gear.

    4. A01DZJME01

      Using a snap ring expander, install the snap ring to the 5th gear.

  3. INSTALL COUNTER 5TH GEAR BEARING

    A01E29LE01

    1. Coat the 5th gear bearing with gear oil, and install it to the 5th gear.

  4. INSPECT COUNTER SHAFT 5TH GEAR RADIAL CLEARANCE

    A01DXWAE01

    1. Install the 5th gear thrust washer lock ball, 5th gear thrust washer and counter shaft 5th gear to the counter gear.

    2. Using a dial indicator, measure the 5th gear radial clearance.

      Standard clearance
      0.008 to 0.034 mm (0.0003 to 0.0013 in.)

      • If the clearance is not as specified, replace the counter 5th gear bearing.