PRE-COLLISION SYSTEM CANCEL SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. REMOVE FRONT DOOR SCUFF PLATE LH

    Click hereClick here

  2. REMOVE COWL SIDE TRIM BOARD LH

    Click hereClick here

  3. REMOVE NO. 2 SWITCH HOLE BASE

    Click here

  4. REMOVE FUSE BOX OPENING COVER

    Click here

  5. REMOVE PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY

    1. for LHD:

      1. B441154

        Detach the 2 claws and remove the pre-collision system cancel switch assembly.

    2. for RHD:

      1. B441155

        Detach the 2 claws and remove the pre-collision system cancel switch assembly.