AMBIENT TEMPERATURE SENSOR REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during thermistor assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Front bumper assembly (w/ Panoramic View Monitor System) Front television camera view adjustment Panoramic view monitor system

Click here

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH


    1. w/o Air Cooled Transmission Oil Cooler:


      1. B0086IJ

        Disengage the 2 claws to remove the front radiator side air guide plate RH.

    2. w/ Air Cooled Transmission Oil Cooler:


      1. B0088O0

        Disengage the 2 claws to remove the front radiator side air guide plate RH.

  3. REMOVE THERMISTOR ASSEMBLY


    1. w/o Air Cooled Transmission Oil Cooler:


      1. B0084PJ

        Disengage the clamp.

      2. Disconnect the connector to remove the thermistor assembly.

    2. w/ Air Cooled Transmission Oil Cooler:


      1. B00883M

        Disengage the clamp.

      2. Disconnect the connector to remove the thermistor assembly.