HEADLIGHT DIMMER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

   
   

   1. Attach the 2 claws to install the headlight dimmer switch assembly.

   2. Connect the connector.

2. INSTALL TILT AND TELESCOPIC SWITCH (for Headlight Dimmer Switch LH Side Type, for Power Tilt and Power Telescopic Steering Column)

   Click here

3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

   Click here

4. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

   Click here

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

6. PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here

7. CHECK SRS WARNING LIGHT

   Click here