DRIVING SUPPORT ECU REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

  10. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for RHD)

    Tech Tips

    Use the same procedure as for the LH side Click here.

  11. REMOVE ECU INTEGRATION BOX RH (for LHD)

    Click here

  12. REMOVE ECU INTEGRATION BOX RH (for RHD)

    Click here

  13. REMOVE DRIVING SUPPORT ECU ASSEMBLY (for LHD)


    1. A005ETF

      Disengage the claw and remove the driving support ECU assembly.

      Tech Tips

      When removing the driving support ECU assembly, if the bracket for the park assist ECU is on top of the bracket for the driving support ECU assembly, remove the park assist ECU first Click here.

  14. REMOVE DRIVING SUPPORT ECU ASSEMBLY (for RHD)


    1. A005EAR

      Disengage the claw and remove the driving support ECU assembly.

      Tech Tips

      When removing the driving support ECU assembly, if the bracket for the park assist ECU is on top of the bracket for the driving support ECU assembly, remove the park assist ECU first Click here.