REAR FLOOR UPPER CENTER CROSSMEMBER ASSEMBLY REPLACEMENT

A01GHAP

  1. REMOVAL

    Symbol Meaning
    B002F5A Remove Weld Points
    A01GHFM Cut with Disc Sander etc.

    1. After removing the A, remove the B.

      A01GHERN01
      A01GHIRC01
      *A LH Side *B RH Side

  2. INSTALLATION

    Symbol Meaning
    B002F5A Remove Weld Points
    B002F3I Plug Weld
    B002F4M Plug Weld

    1. Remove A from a new side member to floor reinforce sub-assembry.

      A01GH8VC01
      *1 SIDE MEMBER TO FLOOR REINFORCE SUB-ASSEMBLY - -

    2. After welding the A to the vehicle side, install the B.

      A01GHETN01
      A01GH7EC01
      *A LH Side *B RH Side
      *a 20 mm (0.79 in.) - -

    3. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.