PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU), Diagnostic DTC:C1626

DTC Code DTC Name
C1626 Steering Angle Sensor Failure

DESCRIPTION

This DTC is stored if the television camera assembly receives a signal via CAN communication from the spiral with sensor cable sub-assembly that indicates an internal malfunction.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1626

Steering Angle Sensor Failure

A fail flag is transmitted from the spiral with sensor cable sub-assembly.

  • Spiral with sensor cable sub-assembly

  • Television camera assembly

CAUTION / NOTICE / HINT

Note:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.

Click here

PROCEDURE

  1. REPLACE SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY

    1. Replace the spiral with sensor cable sub-assembly.

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  2. CHECK DTC

    1. Clear the DTCs.

      Click here

      Chassis > IPA/Parking Assist Monitor > Clear DTCs

    2. Check for DTCs.

      Click here

      Chassis > IPA/Parking Assist Monitor > Trouble Codes

    Result

    Result

    Proceed to

    DTC C1626 is not output

    A

    DTC C1626 is output

    B
    A

    END (SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY IS DEFECTIVE)

    B

    REPLACE TELEVISION CAMERA ASSEMBLY

    Click here